China plug valve manufacturer,factory and supplier-Plug valves

contact us

SHANGHAI HUIXUAN VALVE

Mobile:+86-17717520739
Wechat:17717520739
Email:info@shxvalve.com

Address: NO.720, Suide Road, Jiading District,Shanghai, China.

 

High Temperature lifting type metal seat plug valve

Model:

  • Port size:1/2'' ~ 16''( 15mm ~ 400mm)
  • Pressure:Class 150 ~ Class 900
  • Medium:Water,oil,steam,gas
  • Temperature :-40~450℃
  • Body material:WCB CF8 CF3 CF8M CF3M or others
  • Description:Lift plug valve,lifting plug valve manufacturer,factory and supplier for High Temperature lifting type metal seat plug valve with different material from CL150 to CL2500.
High Temperature lifting type metal seat plug valve introduction
High Temperature lifting type metal seat plug valve adopts raising first after the opening and closing of the valve operating mode, which greatly reduce the High Temperature lifting type metal seat plug valve opening and closing torque.High Temperature lifting type metal seat plug valve usually adopts the circular channel to make High Temperature lifting type metal seat plug valve fluid resistance greatly reduced, High Temperature lifting type metal seat plug valve is applicable to the cutting and connection of pipelines medium that are used in various industries such as petroleum, chemical industry, pharmacy, chemical fertilizer, power industry etc under nominal pressure of ClASS150-1500lBS,and working temperature of-29-550’C.

High Temperature lifting type metal seat plug valve features:
1 Before High Temperature lifting type metal seat plug valve openand close, it lift the plug first, make the plug and valve seat seal face off, and then 90° turn the plug, make the lift plug valve open or close.Because the High temperature metal seat lift plug valve in the process of opening and closing the plug and valve seat phase off, so the opening and closing of the High Temperature lifting type metal seat plug valve is very easy, and the sealing surface in the opening or closing process is not easy to scratch, the Metal seated lift plug valve service life is long.

2  No matter in the open  or closed state, the sealing surface of High temperature metal seat lift plug valve is protected from medium erosion, sealing tight and reliable.

3 The ordinary plug valve adopts rectangular channel, and the area of the channel is reduced, there is a large loss of fluid resistance, But  the High Temperature lifting type metal seat plug valve adopts the same cross-sectional area of the circular channel to be the minimum fluid resistance.

4 High Temperature lifting type metal seat plug valvehas compact structure, small volume, compared with gate valve, the height of the lift plug valve size is greatly reduced, compared with the globe valve, fluid resistance is greatly reduced.

5 Compared with the ordinary plug valve, the High temperature metal seat lift plug valve applicable pressure and temperature range is larger.

6 High Temperature lifting type metal seat plug valve seat sealing surface on both sides can be sealed, the lift plug valve installation and use is not limited by the flow of media.

7 when the High Temperature lifting type metal seat plug valve is closed, it can be through the handwheel and the stem of the valve seat sealing to increase pressure, which can make the plug valve has better sealing performance.

8. The sealing surface of High Temperature lifting type metal seat plug valve seat is raised to facilitate the cleaning of the sealing surface, and the sealing surface is not easy to store crystalline medium or solid particles.

High Temperature lifting type metal seat plug valve Technical Specification:
Design & manufacturer API599, API6D
Nominal diameter 1/2'' ~ 16''( 15mm ~ 400mm)
Pressure class Class 150 ~ Class 900
Length of face to face ASME B16.10
Flange end ASME B16.5
Test & inspection API598, API6D
Operation model Handle wheel, worm gear, pneumatic and electric actuated

High Temperature lifting type metal seat plug valve parts material:
Body : WCB, LCB,LCC,CF8,CF8M,CF3,CF3M or other material
Bonnet : WCB, LCB,LCC,CF8,CF8M,CF3,CF3M or other material
Stem : F6a,F22, F304,F316, F321
Plug : F6a,F22, F304,F316, F321

High Temperature lifting type metal seat plug valve structure:
High Temperature lifting type metal seat plug valve structure

inquiry us

INQUIRY US

微信扫一扫

添加我为好友了解更多